Fine Windows and Doors, Inc.

A good outline to follow is safety, damage, efficiency, and design. The first priority should always be safety and security. If a window does not operate or has broken glass it is a risk. Next up are windows that are defective in some way. You might notice signs of warping, rot, or structural damage. These windows are on their way out and will certainly fail down the road. After that, you can focus on upgrading for efficiency and aesthetics.

Replacing all the windows in your home is a huge investment. It is ok to break up the massive project over several years. As long as you contract to replace five to eight windows at a time, most companies are willing to offer some incentives to save you money. So yes, you can certainly replace just a handful of windows at a time, working from room to room until the entire project is complete.

Sometimes it is obvious when you need to replace a window. It has broken glass, it leaks, it doesn’t open or close these are all clear signs it is time for window replacement as soon as possible. But there are more subtle signs as well including condensation between the panes, a draft when you enter a room, or unwanted outside noise. These are also signs that you need new windows, but homeowners often put off the project until problems become more severe. But if you only have a few problems with windows, do you need to replace them all at the same time? Not exactly.

able to purchase the windows at wholesale rather than retail prices, which can save a significant amount of money. They are also better prepared, should you encounter any surprises on the job, and can help ensure you have considered all relevant local codes and ordinances. When soliciting bids from contractors or licensed installers it’s best to get a few, at least three, to compare. All bids should include information on the cost of materials and an estimate of labor costs for the install. They may also include information regarding their rates, should there be any discoveries while on-site, such as mold or wood rot. Other information regarding building permit costs, site protection and clean-up should also be included along with their warranty policy for the work done.

Replacing the windows on your home can seem like a daunting undertaking. It’s important to take into consideration the window type, material and location to better understand the projected costs. The average price of replacing a mid-range double-hung window is about $600, but that number can range from $200 to as high as $1,200.

Many window design professionals agree that new, quality windows should last between 15 and 20 years before you start to think about replacing them. Most companies producing vinyl windows often provide a 20-25 year warranty, which is essentially a lifetime warranty – the expected lifetime of the product.

To gain access to the interior of the windows, all mini blinds, vertical blinds, roll-up shades, shutters, drapes, and any other window coverings need to be removed before installation. If you think it might get in the way on installation day, it's probably best to move it to a safe place.

If your frames are in good condition, you can replace the window without replacing the window frames – this is known as a pocket window replacement. However, if your frames are aging, it will be best to opt for full frame replacement windows.

Contractors will need to work from inside your home as well, but as far as how the windows are installed, that depends on the type of replacement window chosen and the condition of the rough opening.

In many cases, windows can be installed at least partially from the outside. However, every home is unique, and there may be some features of your home's window openings that require all or part of the replacement window installation process to occur inside.

There is some demolition involved and with it some mess. That said, window installation professionals know how to prepare the space to minimize mess and only leave behind new windows when the job is complete.

Yes, it does. Your door is one of the first things people notice about your property. It sets the tone for the rest of your home. A poorly installed door can be seen from the curb and will definitely affect the overall impression your guests have about your home. Installation can also affect energy efficiency—a door needs to close snugly against all weather-stripping and have no gaps. We strictly adhere to manufacturer installation recommendations. Every door we install is properly installed for maximum curb appeal and energy efficiency.

Casement Windows (rectangular windows that open outwards with a handle) Picture Windows (large fixed square windows that don't open, great for views) Bay Windows (multi-window style that protrudes from the home and can include a seating area)

bay window, window formed as the exterior expression of a bay within a structure, a bay in this context being an interior recess made by the outward projection of a wall. ... A bay window is also called an oriel, or oriel window, when it projects from an upper story and is supported by corbels.

The typical window replacement cost is between $200 and $1,800 per window, and the national average is around $100 to $650 per window, depending on window frame material and glass type, among other factors. Labor adds to the overall window replacement cost and can run approximately $100 to $300 per window.

Years of dirt, exposure to the elements and hard use can turn sliding doors into sticking doors. Here's how to repair your sliding door and make it run like new. Sliding glass door repair will get the job done. If the door still doesn't slide smoothly, the rollers under the door either need adjusting or are shot.

A storm door is a second, outer door commonly installed for protection against bad weather, and allows for ventilation in fair weather. Storm doors typically have interchangeable or retractable glass and screen panels. And like front doors, they're available in many sizes and materials.

Glazing is just another word for the glass in a door or window. The glazing in newer exterior doors like this one are made up of at least two layers of glass and sometimes three.

Glazing is just another word for the glass in a door or window. The glazing in newer exterior doors like this one are made up of at least two layers of glass and sometimes three.

Aluminium has a high strength-to-weight ratio, which prevents it from denting even when mechanical force is applied intentionally. Its tensile strength makes it a go-to material for optimum privacy, personalisation of design, and ergonomics.

Expensive – aluminium front doors are much more expensive than another other type of entrance door you choose for your home but have similar benefits to composite doors which come with a lower price tag.

Aluminium doors are inherently strong and stable and because they have innate design integrity they are very secure and will resist forced entry far better than uPVC, fibreglass composite or wooden doors. These high quality treatments are ingrained within the door skin and are very hard-wearing and refined.

However, there is a difference between the two: Ventilating = continuously refreshing the air inside your home (day and night) Aerating = briefly (20 minutes up to half an hour) letting in a large amount of air by opening the doors and windows.

Custom windows are specifically designed to fit a unique style. By ordering a custom window, you are able to create the right window you need for your home. These windows are made to order for your specifications and can be made in nearly any size, shape or design.

The difference between single-hung and double-hung windows is the number of sashes that move. A single-hung window has one fixed, or non-operable, sash and one operable, or moveable, sash. A double-hung window has two operable, or moveable, sashes.

They come in a wide range of sizes to fit any rough opening. They are often found in the bedroom, kitchen, hallways, and all over the house. Double-hung window width can be anywhere from 24 to 48 inches. A double hung window's height can range from 36 to 72 inches.

A trustworthy window replacement contractor is your safest and highest quality option if you want the project done correctly, both in the short and long term. But it's important to properly vet and research contractors before choosing your perfect fit, even if a friend or a family member personally vouched for them.

Window contractors set up installations, removals, and repairs of window treatments in residential and commercial buildings. They might be self-employed or work for companies under subcontract or as window installers.

Recommended rough opening is between 3/4" (19mm) - 1" (25mm) larger than the window width and height. Ensure that the rough opening is plumb, level and square, and the walls in the opening are not twisted. Temporarily tape the flap up out of the way to allow for window installation and head flashings.

Window ventilators are used for ensuring a supply of fresh air from the outside into the interior. They are used in rooms with natural ventilation, mechanical extract ventilation or hybrid ventilation.It automatically adjusts the inflow of fresh air depending on the level of relative humidity in the room.

Advantages of aluminium doors structural stability, outstanding acoustic and thermal insulation, excellent anti-burglary protection, a very long useful life and. almost unlimited design options.