OC Pavers and Turf

We're not suggesting that you try to fix the pavers yourself. The key explanation is that the pavers need to be fully dry and clean before sealing. This is normally difficult when the sand is joined in place. Will accentuate any dirt or flaws that may be present on the paving. Best bet is to order sealed pavers from factory.

Yes, but if you lie directly on top of a concrete slab, you may need a move. It's recommended that you get a quote to remove concrete slabs, because it might not be that costly.

Smooth pavers- with a soft floor and flat angles. Textured pavers– have a textured layer that adds a costly appearance. Tumbled pavers– fractured and looked at the angles as an artifact and trouble.

Yeah, it's true! Your basic material planning is the most important part of installing pavers on your driveway. Make sure that your base material is compacted and that you use a good edge protection, and you should have a properly paved surface for the use of your car.

It may not be for everybody to seal pavers. While locking pavers have many advantages, it adds needed servicing to a low-maintenance scheme otherwise. When using a water-based sealer and 2-3 years when using an acrylic sealer, sealed pavers need to be resealed every 3-5 years.

In the future, laying the pavers too tight can simply trigger some problems. The suggested room is 3 mm between the pavers

Hello Maree, They are concrete pavers stones that come in several different shapes and colors. A better example would be some of our previous projects in the gallery.

In particular, there is very little distinction between pavers. The significant distinction is the pavers ' manufacturer. Paving products can differ from one maker to another. The characteristics that create a paver ideal are its compressive strength, water absorption frequency and coefficient of abrasion.

Interlocking pavers are powerful and sturdy fabrics that can resist high stresses and extended weather-changing exposure. They're also flexible and highly ornamental.

Brick, concrete, rubber, and natural materials such as wood, granite, slate, calcareous stone, and travertine are among the most widely used pavers.