Follow this steps to remove successfully the commercial toilet -Step One is to shut off the water to the building or to the bathroom if it is possible. -Find the water supply pipe that comes out of the wall in the back of the toilet. Place a screwdriver into the hole behind the pipe's cap and twist it to turn off the water supply. -Flush the toilet to empty the bowl and if it does not fill back up, the water has successfully been turned off. -Unscrew the water supply hose from the shutoff valve and pull off the decorative caps from the two bolts in the bottom, back corners of the toilet. -Lift the toilet up and out of the stall and remove the four screws in the back corners. Use a wrench to unscrew the nuts from the floor flange bolts at the front of the mounting point. -Extract the two screws holding the toilet in place and lift it off the floor.
Follow this steps to remove successfully the commercial toilet 1) Step One is to shut off the water to the building or to the bathroom if it is possible. 2) Find the water supply pipe that comes out of the wall in the back of the toilet. Place a screwdriver into the hole behind the pipe's cap and twist it to turn off the water supply. 3) Flush the toilet to empty the bowl and if it does not fill back up, the water has successfully been turned off. 4) Unscrew the water supply hose from the shutoff valve and pull off the decorative caps from the two bolts in the bottom, back corners of the toilet. 5) Lift the toilet up and out of the stall and remove the four screws in the back corners. Use a wrench to unscrew the nuts from the floor flange bolts at the front of the mounting point. 6) Extract the two screws holding the toilet in place and lift it off the floor.
Thanks! Your answer is awaiting moderation.