ATM Tires INC

nolan dior

Went to get a set of tires for a good deal, and they gave me a almost brand new set of Goodyears for 450 dollars which is the only reason this review isn’t 1 star. It was very sketchy as they didn’t have a lift, and they just jacked the car up and took the wheels off. Basically they overtorqued and rounded my lug nuts so badly to the point where I had to go buy a bolt extractor and still can’t get them off. Go here at your own risk, affordable tires but the process they put them on is not safe.

Pinko Possum

I have horrible anxiety around cars and the dude here was very kind. My low pressure light wouldn't go away so he checked all my tires and took care of it very quickly and sent me on my way. He was great.

john Hellevik

Lots of great used tires. Good prices. Friendly staff

sTiTcH

DO NOT GO HERE. Severely over-tightened the wheel bolts, they were torqued to the correct spec when I took it in. I had to go buy a massive breaker bar to loosen them after they put the wheels back on. They also over inflated the front tires by 8 psi, dangerous. As far as the tires they sell, there is a huge difference between used tires and defective/repaired tires. The first set of tires they were going to install ended up having bulges in the sidewalls. DEFECTIVE. So they tried to get me to switch to another set. One of those tires was patched, if I didn't see the marking on the tire they would not have disclosed that. REPAIRED. On top of that they were run-flat tires, you CANNOT repair a punctured run-flat tire. Any manufacturer or reputable retailer will tell you that. Once a run-flat tire has been punctured it's compromised, that's why they were taken off whatever vehicle they were on. If you care about your safety or your vehicle do not go to this place. After trying to be sold two sets of tires with serious issues, I walked away with nothing. I had to spend $40 on tools to get the front wheel bolts off and not sure what it will cost yet for new wheel bolts. They were over-tightened so much the threads are likely stretched. Dreadful experience, had to write this to warn others.