Rytec Electric

That’s no problem. We’re available 24 hours a day, 7 days a week, so when you need us, we’ll be there.

Depending on the damage to your electrical systems, repair work can take anywhere from a few minutes to a few hours.

First things first, you need to determine why the power went out. If it’s a fault with your utility company, you can check and see if your neighbors have also lost power. If it’s just your home affected, check your service panel to see if any of the switches are turned off. If you turn them back on, and power is still not restored, our team of licensed electricians can you help you figure out what’s wrong, and perform any emergency electrical repairs to get your power back on.

Our electricians are ready to help with any electrical problems you have, such as: Storm damage repairs. Service panel repairs. Electric meter repairs. Wiring repairs. Electrical components and appliance repairs.

If you experience any of the following in your home or commercial property: Continuous loss of power. Burning smells from outlets, electronics, or service panels. Scorch marks on electrical outlets. Buzzing, popping or sizzling sounds from your breaker box. Smoke or fire from any electrical source. Electrical shocks. Then it’s definitely an emergency! Don’t wait to see if it goes away on its own. Call us now — actually right now — at 803-399-8879.

Not much, but that depends on the type of lights you use for your business. Opting for LED lights can reduce the level of maintenance needed, as they last so much longer than other solutions. Call us at 803-399-8879 and we’ll arrange a free consultation for all your commercial lighting requirements.

Motion sensors can be connected to any lighting installation, inside or outside your premises. Ideal for saving even more costs on your electricity bill, they illuminate once motion is detected, then turn off approximately one minute later to save power.

Of course. We’ve spent over 15 years installing outdoor commercial lighting, so we know how to take environmental conditions into account. We’ll help you design, and install commercial lighting that efficiently meets the needs of your business.

LED lights and bulbs are the most energy efficient commercial lighting you can choose for your business premises. They use 75% less energy, and last up to 25 times longer than other lights. Replacing your fluorescent, incandescent, CFL, metal halide, high pressure sodium, and halogen lights with LEDs in your business premises will also reduce the maintenance needed for your lighting.

While the local building inspector would be happy to provide you with a list of violations, the best way to find out if your commercial property needs a retrofit is to book a free electrical safety inspection.

Rytec Electric’s commercial electricians can: Design. Install. Inspect. Maintain. Repair. All electrical systems and wiring in your new commercial constructions. We’ve also got the skills, flexibility, and teamwork approach to work with other contractors on large scale projects.

Definitely. No matter what type of business you run, surge protectors can prolong the life of your electrical systems and equipment. A surge or jolt of power can immediately cause your computers and telecommunication devices to lose data that’s vital for the day to day running of your business.

Definitely not as expensive as emergency electrical repairs from fire damage or overloaded service panels, but costs can vary. Electrical maintenance is designed to save you costs in the long run, and we always work with our customers to provide the highest quality service at affordable prices. Call us at 803-399-8879 to schedule a free consultation with one of our commercial electricians.

At Rytec Electric, we recommend yearly electrical safety inspections of your commercial property. Essential for protecting your investment, yearly inspections will assess and diagnose any electrical issues you have. Along with ensuring your commercial property meets electrical and safety codes, which can change on an annual basis.

Commercial properties of all shapes and sizes can benefit from regular electrical inspections and maintenance, including: Factories. Offices. Retail units. Leisure facilities. Schools. Hotels. Gyms. Hospitals. Offices. Call us at 803-399-8879 to find out what commercial electrical repairs and maintenance we can provide for your business.

Electrical maintenance of your business premises is essential to prevent avoidable downtime from electrical failures. Without regular service and maintenance, you’re left open to anything from an inconvenient blackout to an electrical fire that takes your entire business down with it.

Rytec Electric’s commercial electricians can: Design. Install. Inspect. Maintain. Repair. All electrical systems and wiring in your commercial property. We’ve also got the skills, expertise, and teamwork approach to work with other contractors on large scale projects.

Very little maintenance is required to keep your EV charging station running at optimal efficiency. If you have any trouble with your EV charger, call us at 803-399-8879. Our friendly, reliable electricians are on hand to solve any problems you have.

Many factors come into play when charging your EV: Current level of battery power Battery capacity Charging station’s capacity and settings Charging station’s energy source Type of electric vehicle you own Depending on these factors, it can take anywhere between 1-4 hours or 6-8 hours to fully charge your vehicle.

Most electric vehicles require level 2 charging. If you have a plug-in hybrid, check with your EV manufacturer to see if your vehicle, and charging cord, are suitable for Level 1 charging. Suitable for regular outlets, Level 1 chargers use 120 volts of electricity and are compatible with regular outlets.

Yes, we do! Commercial and public EV chargers vary between 240 volts to 600 volts. These are more complex to install. Rytec Electric’s professional technicians have the expertise and experience to install both home, and commercial EV chargers.

It’s essential to hire a certified electrician to install home EV charging stations. Level 2 EV chargers use 240 volts of electricity, and therefore require the skills of professional technicians.

Many different types of EV chargers are available on the market. Only you can decide what’s best for your home and your vehicle.

Prices can vary, depending on the manufacturer and type of EV charging station you need for your vehicle. Call us at 803-399-8879 to get a FREE estimate on the cost of installation.

All work and services performed are guaranteed for one year, when you work with Rytec Electric on your new construction project.

It’s hard to say without knowing the full details of your project. Best advice is to schedule an appointment with one of our technicians, so you’ll have the answers to all of your questions instantly.

Rytec Electric’s fully-licensed, construction electricians assemble, install and wire all electrical systems in new homes, such as: Light Heat Power Security Air-conditioning Refrigeration

Definitely not! If your breakers are warm or hot to the touch, they could be:Overloaded with power Inadequate for use Defective Incorrectly installed Hot circuit breakers are a fire hazard and should be investigated by a certified electrician immediately.

If there’s a faint humming sound from your electrical panel, you should have nothing to worry about. But if you hear any of the following sounds: Crackling Sizzling Buzzing Popping Your panel should be checked out by a certified electrician immediately. Faulty circuit breakers or loose, damaged wires can cause electrical fires and put your family at risk of electrocution. Rytec electric offers FREE home electrical safety inspections. Call us at 803-399-8879 to arrange one today.

For simple repairs, our electricians can assess and fix the damage within a couple of hours.Upgrading an old breaker panel could take several days, depending on the scale of work.

If your home is over twenty-five years old, you likely need at least an upgrade if not a full replacement. You should definitely upgrade if you: Want to install new appliances. Have lights that flicker when appliances are on. Notice fuses short out from heavy voltage loads. Own a fuse box instead of a circuit breaker panel. No longer meet building codes with your panel. Often use extension cords.

Many factors come into play when working out costs of an electrical panel upgrade or replacement. Depending on: Type of panel already installed Full panel or a sub panel that needs upgrading What appliances and equipment you’re using Costs can vary. Call us at 803-399-8879 for a FREE estimate on an electrical panel upgrade.

Depending on the type of light, how many you need and your current electrical system, prices can vary. Call us at 803-399-8879 to speak to a technician and get a FREE estimate on your project.

One of the most energy efficient ways to illuminate your home is with recessed lighting. Installed on any flat surface, they seamlessly blend into your décor, and can be used: For general ambient lighting To showcase a particular area in your room Provide brighter light for your kitchen, garage or home office

Dimming lights when appliances are turned on is a sure sign of problems in your lighting system. It could be due to: Overloaded circuits Inadequate electrical service Wiring problems Issues with the appliance itself It’s best to check with one of our electricians, in case you need an electrical panel upgrade. Schedule a FREE home electrical safety inspection to ensure you’re not at risk of electrical fires and other hazards.

Generally, electrical home inspections take between two and four hours. All this depends on the size of your home, how many electrical outlets there are, how many floors there are, etc. Call us at 803-399-8879 to get an accurate time estimate from one of our electricians.

Rytec Electric’s certified electricians will outline any failures in a detailed report, along with actions needed to repair them. We’ll offer insight on the safest way to meet code regulations and work with you to ensure all electrical systems are functioning with safety in mind. Quotes for repair work can be given on-site if requested.

All electrical systems must meet safety and building code regulations. Checks are performed to ensure the following criteria are met: No shock or electrocution hazards. Functioning circuit breakers and fuse boxes. Unused openings must be closed. Breakers and wires must be labelled. Proper grounding throughout the system. Outlet and light switch heights. Discoloration of any outlets or light switches. Must have wire anchoring and intact insulation. All appliances and wiring must be functioning at the highest level. And all essential safety checks are performed.

In recently built properties, you should only need an electrical safety inspection every ten years. But, if you’re: Installing a new appliance. Purchasing a new home. Undertaking any major renovations. It’s best to request an assessment to ensure all legal safety standards are met. In older properties, it’s vital to check all electrical systems in your home every three-to-five years to assess energy efficiency and test aging wiring and circuits.

Rytec Electric provides electrical home inspections FREE of charge. Get in touch with one of our residential electricians to find out more.

An electrical home inspection is a comprehensive assessment of all electrical systems in your home. Designed to identify any loose-fitting outlets, fuse box or circuit issues and potential hazards or code violations.

Yes, we specialize in both commercial and residential new construction projects with our team of reliable, certified electricians.

Lighting installation involves fitting new light devices like bulbs, lamps, and switches to your rooms, along with running new wires and connecting them To update light fixtures, you generally only need to fit the light devices and switches. But in outdated electrical systems, you may have to replace or run additional wires from your circuit breaker anyway.to your circuit breaker.

Of course. We offer FREE estimates on all electrical work. Call us at 803-399-8879 to arrange a consultation.

Lexington Chamber, BNI, and BIA are just a few of the associations were members of.

With over fifteen years of experience working on new commercial constructions and commercial property retrofits across South Carolina, North Carolina and Georgia, weve got plenty! Just ask and we will provide references to owners of businesses like yours.

With such a wide variety of electrical repair services available, it’s impossible to give a price without knowing more details. Call us at 803-399-8879 for an estimate, or to book a free home electrical inspection.

With such a wide variety of electrical repair services available, it’s impossible to give a price without knowing more details. Call us at 803-399-8879 for an estimate, or to book a free home electrical inspection.

That’s no problem! Our services are available 24 hours a day, 7 days a week.

Dealing with electricity is dangerous, so you should always call a certified electrician to complete any electrical repairs in your home. This is especially true if: Circuit breakers trip or fuses blow repeatedly. You need to install or move outlets, light fixtures, or switches in a room. Lights dim when household appliances are in operation. You see evidence of water damage, like rust, near electrical systems. GFCI (Ground Fault Circuit Interrupter) outlets aren’t installed in a kitchen, bathroom, garage or outside. You want extension cords moved or installed. Electrical switches and outlets feel warm or don’t work properly

Of course! Our certified electricians specialize in rewiring and installation of all electrical equipment including: Appliances. Home renovation wiring. Basement wiring. Pools, spas and hot tubs. Smoke and carbon monoxide detectors. Outlets, and many more.

If there’s electricity running through it, we can fix it. Technicians are available 24/7 for electrical repairs and maintenance of:Switches & Outlets Lighting & Ceiling fans. Security & Intercoms Panels & Breakers. Electrical Wiring