24/7 Lockout King - A Mobile Locksmith

No, it is very risky to drive a car that has tires that are worn out as it can cause the car to skid and the tire to blow out at any moment on the road. It can also make you lose control over the vehicle while driving.

Yes, it is safe to change any car tire by yourself. But it does require a lot of strength and proper knowledge. Therefore, if you do now know how to change the tire accurately, it is ideal to call for professional help to avoid damage.

No, as this can damage the engine of the car and its fuel injection system. It will also damage its fuel pump.

Keeping some tools in the car is important in case of emergencies. It is always advised to carry Jumper Cables, screwdrivers, wrenches, Pliers, and flashlights.

No. It is suggested not to refuel the car with its engine due to the presence of static electricity that can induce sparks.

Like any other mechanism, a door lock can eventually wear out with time as well. It might get jammed and get stiff from collecting debris or can get damaged over time from usage. But door locks are usually very easy to fix and repaired or replaced as well.

Deadbolt locks are considered to be the most secure ones for the door. These are available in both single cylinder and double cylinder styles.

Yes, it is possible to repair a broken cylinder lock by removing the unit from the door. But this can be a tricky task. You can call professional locksmiths to get this done if you are unsure of the process of fixing it yourself.

The reason that the key might keep turning all the way is that the piece that helps to turn the deadbolt might have broken or detached. To fix this you might have to remove the lock from the door.

There can be various reasons why a lock might stop working. It can be due to some problem with the lock Cylinder. Debris can also cause the lock to not turn or it might be that the internal mechanism is somehow broken.

A small leak from a nail can be easily repaired and is worth the money. However, if the damage is too far beyond repair, then it is ideal to replace it vs trying to fix it.

Yes, but it usually requires taking off the cylindrical part that consists of the keyhole. It is a tricky process and if not sure of the exact method of fixing the issue it is ideal to call a professional locksmith for help.

You can change the tires at different times but it is best to have them replaced all at the same time. As the tires run independently each has its own style and depth and changing one at a time can cause them to spin at different speeds. So it is ideal to change them all at once.

It is recommended to change the tires of the car every five to six years.

The easiest way to know if the tire requires air is to see if it's flat. A pressure test or a fast spot check is known to be the best method to identify a flat tire or if it requires more air. A flat tire will also cause unusual noise and cause difficulty in accelerating.

Jump starting a car is a very straightforward method. It should only take about 5 to 10 minutes to do so if all the steps are implemented correctly.

Connecting the negative to the positive will yield a large surge of electric current that can cause the battery to heat up and generate hydrogen gas from the chemical reaction.

The car's whole frame, as well as the nuts and bolts, will get grounded if the negative terminals are connected first, and then connecting the positive terminals will therefore cause a short circuit which might even cause the battery to explode.

Jump starting a car is a simple and straightforwards process if you know the correct mechanism of doing it. If you know the process well you can try to jump the car on your own. However, if you are not certain of the steps included in jump-starting a vehicle it is ideal to call for professional help as a wrong move can cause serious damage to the car

The process to jump-start a car is pretty much the same for all. However, it also depends on the internal system of each vehicle due to which some cars might require a different approach to jump start. It is always ideal to call for professional help in these cases.

Jumping a car is a straighforwar process. If the steps are followed properly then it should only take about 5- 10 minutes. However, if you are not familiar with the process then it is better to call for professional help.

Connecting the positive end to the negative will generate a large wave of electric current between them. This can cause the car battery to heat up and produce hydrogen gas from the chain chemical reaction.

If the negative terminals of a jumper cable are connected first, the car's entire frame, along with the bolts and nuts gets grounded, and connecting the positive terminal will cause a short circuit. This can lead the car battery to explode as well.

The process of jumpstarting a car is fairly straightforward. However, there are some hazards associated with it if not done the correct way. If the process is not implied correctly it can cause critical damage to the car's internal system.

The method of jump-starting is somewhat similar for all cars. It really depends on the car's internal system. Some modern vehicle tend to have a more complex internal system than the others, which might require a different jump-starting approach. It is wise to call for professional services for help in that case.

This can often happen due to the collection of dirt within the lock’s cylinder. Try spraying the door lock with lubricant to clean off the dirt and debris. Insert the key into the lock several times to spread the lubricant. In case if it doesn't still turn then it is wise to call for expert help.

If any of the parts within the door panel gets detached or disconnected that might obstruct the total lock system of the door and put it in a locked state. It is wiser to seek help from expert locksmiths to avoid any damage to the car door.

To remove the old lock, unscrew the knob plate of the lock using a screwdriver and pull out the knob from both sides of the door. Once the knobs are off, take off the screws that are holding the latch together in place. Be careful to not cause any damage to the surface of the door while taking the lock off. It is ideal to get help from an expert to avoid damage.

Some basic tools and objects that can be used to take a broken key out of a lock are screwdrivers, bobby pins, pliers, safety pins, or a swiss army knife. Any pointed object is good enough to help you get the ket out of the lock.

This can be done by entering a screwdriver or any other fine and pointed tool into the lock and slowly turning it back to its original position. Once the lock is back to its default place, use the tip of a needle nose plier to take the broken key out of the lock.

It is fairly easy to jump-start a car. It only takes about 5 to 10 minutes if you follow the steps properly and take corrective measures. However, if you do not have enough experience with the process it is wiser to call for help from professionals.

Attaching the positive terminal to the negative terminal will produce a great wave of electric current among them. This will lead to the batteries heating up and the production of hydrogen due to the chain chemical reaction.

When the negative terminals are connected first, the entire car frame becomes grounded along with the bolts and nuts of the frame. After that, connecting the positive terminals will create a short circuit that can cause the car battery to explode due to the spanner touching the frame or the grounded part.

Even though the process of jumpstarting a car is reasonably simple, there are some risks connected with it. If not done correctly it can cause severe damage to the internal system of the car. therefore, it is always a wise idea to get help and assistance from professionals if you need to jump-start the car.

The process of jump-starting is more or less the same for all cars however, it also depends on the internal electronic system of each car. Some cars tend to have different and complex internal systems and have to be dealt with differently while trying to jump-start them.

It is important to maintain a regular check on the tires of the car. Driving a car with worn-out tires has a high risk of skidding and tire blowout and other risks like hydroplaning or even losing control over the car while driving.

Yes, it is completely safe to change the tires by yourself. Changing the tire requires strength and knowledge of taking it off accurately without causing further damage. If you do not have prior experience of changing the tires then it is ideal to call for professional help rather than doing it yourself.

No, as doing so can cause serious damage to the engine of the vehicle as well as its fuel injection system. Adding petrol to a diesel car will cause damage to its fuel pump due to a rise in friction. Hence it is advised not to add petrol to a vehicle that runs on diesel.

It is important to carry some tools in the car just in case of emergencies while you are on the road. Some of the basic tools that are ideal to carry are Jumper Cables, Pliers, Screwdriver, flashlights, and wrenches.

Due to the presence of static electricity, it is advised not to refuel the car while its engine is on. Refueling the vehicle with its engine on can cause sparks. This happens due to the fuel vapors at any petrol station and could also lead to combustion.

You can try push-starting the car. But in most cases when you have a dead battery, you will have to power it up using another car. You can always call for help from professionals in case you are unaware of the steps of jump-starting the car to avoid damage and accidents.

Jump starting a car only takes a few moments once you have successfully installed the jumper cables in the correct order. In situations where it is difficult to find assistance from another car, it is ideal to reach out to professionals for help.

It is safe to jump-start the car in the rain as long as you know the procedure well and take adequate safety precautions. Make sure that the cables are in good condition and are not old or damaged. Old and damaged cables might cause a short circuit, especially if rain finds a way into the cables.

Dead car batteries tend to draw large currents at first. So, when you begin to charge them initially and connect the cables to the battery, it might cause some sparks. Even though it is safe to jump-start the car yourself, it is ideal to call for professional help.

First, begin by attaching the clamp of the red jumper cable to the positive terminal on the dead battery and then attach its other end to the positive terminal of the working car battery.

Often the lock on cars can get clogged and jammed as well just as it occurs with any other lock. You can try spraying some lubricant on the lock and use the key to lose the lock and try turning it. The lubricant should clean up the lock but in some cases, this might be due to any other defect on the lock mechanism.

First of all, take off the screws from the old lock and start replacing the knob lock. Take out the screws off of the knob plate using a screwdriver and start pulling out the knob from either side of the door. Lastly, take off the screws that hold the latch in place. Try to be careful and avoid any damage to the door as sometimes the screws might be tightly jammed.

This is a problem that usually occurs with outdoor locks as it often tends to collect dirt and dust in the lock’s cylinder. You can try fixing it by spraying the lock with some lubricant to clean the dirt. The lubricant will help to free the clogged plug and clean off any dirt. Try to put the key into the lock a few times to help spread the spray lubricant. This method should work most times, but in a few cases, there might be other obstructions and it can lead to a broken key as well. It is wiser to call in for help from experts in such situations.

First of all, grab a screwdriver or any pointed tool and insert it into the door lock. Try to turn the and bring it to its initial default position. Then using a thin plier, try to get a grab on the broken key. The method should effectively extract the broken key but there are cases when it gets jammed pretty badly inside the lock. It is ideal to call for professional help from locksmiths in that situation.

It is fairly easy to remove the hubcap or wheel cover from a tire. You need to take it off in order to get to the lug nuts while changing the tires. To safely remove the hubcap of the tire you can use the flat side of the lug wrench. Generally, this should work for most cars however some car’s hubcaps are set up differently so you might need some other tools in that case.

It is very important to place the jack securely under the car so that it doesn’t slip. In order to avoid the jack from slipping try placing a piece of wood under it. This way it will be secure and won’t slip underneath the heavy car weight. Never go under the raised car or lean on it when it is raised high above the ground in order to avoid any injury.

These situations are very unpredictable and anyone can end up with a flat tire in the middle of the road. However, it is wise to be well prepared for facing this kind of situation. Always carry a spare tire along. If you get a flat tire in the middle of the road, try to keep calm and find a safe location near to change the tires. Do not forget to block the tire. Always loosen the lug nuts first before trying to lift the car up. Also if you do not have the proper guidelines on how to change the tire it is ideal to call professionals for help.

First, remove the hubcap if you have one and start loosening up the lug nuts. Try not to take them off completely. Then bring the jack and place it under the car flame near the tire you are attempting to change and start lifting the car. Pull the flat tire gently to remove it off of the bolts. Now that the old tire is off safely, start mounting the new tire on the lug bolts. Secure the new tire properly and make sure the lug nuts are tight. Once the tire is in place, lower the car gently and remove the jack from underneath. Then you can reattach the hubcap back on. However, it is a very long and tiring process and if the tire is not secured properly can end up in serious disasters. So, it is always ideal to call for professional help in these cases.

It is always a great idea to keep some important tools along that might come in handy if you get a flat tire. To change a tire you will need a car jack, an extension bar, a wrench, and alignment studs depending on the car model. Also, remember to always carry a spare tire along.

It is wise to always start by looking over the owner's manual. Many cars don't support jumpstarting due to certain configurations and circuitry. It is ideal not to start batteries that are cracked or corroded or even leaking. Also, never touch the cable clips together.

You can of course attempt to jumpstart the car yourself if you have access to the equipment required for the task. However, there are certain risks associated with which might overcomplicate things if not done correctly. In cases like that, it is always wiser to call for help.

The battery has two terminals, a positive and another negative. They should be marked so that it is easily identifiable. Start by connecting the clips on either end of the jumper cable to the car battery and power source. The car battery will have a positive terminal and a negative terminal. To complete the circuit, connect the positive clip to the positive terminal and the negative to the negative terminal. It is important to connect the cables to the right terminal to complete the circuit.

Yes, if you have access to a portable battery and jumper cables, then it is very much possible to jumpstart a car without any other helping hand. However, if a portable battery is not available in any case, then it is wiser to ask for help to attain a power supply from another vehicle.

There are a few basic things that are needed when a car has to jumpstart. You will need Jumper cables. Make sure that the cables are long enough and also well insulated. You will also need some kind of power source, it can either be a portable battery or can also be drawn from another car. However, in cases where you do not have access to any, it is ideal to take help from professionals.