Heads Up Racing LLC

Kevin Schmidt

Had Bruce notch the bottom of the cylinders for the stroker crank and then assemble the engine. Got it home and installed it, filled the fluids. When checking into why it would not start I found water and anti freeze in the oil. One of the notches went into the water jacket and there was a pin hole in the brazing. Took the engine out and back for repairs. He made me remove the intake and head on that side so he could put in block fill to seal the hole. I had to reassemble the engine after at my cost for new gaskets, oil and anti freeze. Next I get the engine running but it is fouling the plugs, a little investigation and I found that the valve stem seals were damage when they were installed. I am in the process of replacing them right now. Just giving an account of what happened for me..

Gaberielle

This place is awesome

Tooboo Bowman

A good person

Josh Sedlmeyer

Got referred here by my cars previous owner when I first got into cars. Went in with a tune issue(unknown at the time) and their solution was to wire the fan so that it runs all the time. Not knowing any better and trusting that these people would take care of me I left with the same issue I came in with and now the fan just stays on at all times. Ill recommend just about any shop other than this one