Allegiance Pressure Washing

If you are using a water-based sealant, then you will need to reapply the sealant every 4-5 years after the first time. If you are using a solvent-based, acrylic sealer, then you should reapply it every 3 years.

If you experience any dew, accidental sprinkling of water or rain as the sealant dries, the sealant can become stained, cloudy, blotchy, or discolored and it will no longer be aesthetically pleasing. Simply don't seal your paver if there is even a remote chance of rain, fog, or a drizzle.

Vehicles must stay off the sealed areas for 48 hours minimum. Foot traffic is generally ok after 5-6 hours. Due to this try to schedule a paver sealing appointment during a time of day when traffic in that specific area is low.

After installing your pavers, you should wait 2-3 months to seal them so that the pavers have a chance to set in and dry naturally. Before you are ready to seal, always professionally wash your pavers.

When the sealant is applied to brick pavers, they won't be any different than if you were to seal coat a driveway. When you walk on it with bare feet or shoes, you won't notice any difference in the feel at all. Even if you were to choose the glossy look finish for your sealer, they still won't be slippery.

Not sealing your pavers can result in quicker erosion, weed growth, mold and mildew buildup, discoloration, and loosening of the paver. Having your pavers sealed professionally is always recommended and will be beneficial to extending their lifespan, keeping them clean, and keeping stains off.

A warm, sunny day is the best time to pressure wash your house. The warm sun will be able to dry out the house after washing. You should also consider pressure washing your home after the rainy, storm season has passed.

Professionals recommend a combination of both a sprayer and a roller. You must make sure the sealer is applied evenly to the surface. Using the spray technique and back rolling any puddles will result in a smoother application and a smoother finished product.

Having a professional paver sealing company come out and do the job correctly is always highly recommended. The cost to seal pavers from a professional company normally runs around $1 - $3 per SQ FT.

Soft washing only uses 60 gallons of cleaning solution, which consists of about 40 gallons of water. The cleaning solution is so effective that it lasts 4 – 6 times longer than pressure washing solutions.

There are many ways to seal pavers from going the DIY route to having a professional do it. However, having the right tools and knowledge of how exactly to seal pavers is required, if you want it to look good. Having a professional paver sealing service will allow you to have perfectly sealed walkways, patios, and decks.

The amount of time it takes a professional to soft wash a typical house ranges from about 30 minutes to 2 hours depending on the size. An additional 15 to 30 minutes of setup and pack-up time is also needed.

Yes, sealing your pavers is the best way to protect them against the elements, and make them easier to clean. Most pressure washing companies offer paver sealing services after cleaning the pavers in order to make them look cleaner for longer.

Though built to withstand a rainstorm, pressure washing can force water into cracks and crevices and cause damage and costly repairs to your home. The better option is to soft wash your house in order to prevent damages to your home.

It is never recommended to water blast your home as the danger it presents. Water blasting can harm your exterior faster than cleaning it.

Professional soft washing is the best and safest way to clean your home. The soft washing process consists of very low PSI and specialized cleaners in order to cut through the unsightly stains on your exterior.

You should try to professionally wash your house every 6 to 12 months to keep your home consistently clean from mold, algae, and dirt.

Clogged gutters, caused by a build-up of debris, can hamper effective rainwater drainage and long term can cause expensive and preventable damage to your property. Gutter cleaning is the process of removing debris that builds up within the gutters, to ensure the free movement of water into the downpipe.

If too high of pressure is used, pressure washing your patio can cause significant damage to the integrity of the paving slabs. It can cause surface degradation, marks, pitting, and damage to the joint sand between each paving slab.

In the right hands, pressure washing can be incredibly beneficial to your home. When used at the proper levels, pressure washing can clean your house of mold, bird droppings, and unsightly stains on your property.

Using a driveway sealant on your driveway after pressure washing offers an extra layer of protection against stains, scratches, and damages. Many pressure washing companies offer a sealant as an add-on to their services.

Dirty gutters lead to clogged gutters and this presents lots of problems for your home. Wall and ceiling damage can be caused by clogged gutters as well as water leaks inside of your home. Trapped water can rot the wooden boards your gutters are mounted to, letting moisture enter your home and allowing mold to grow.

We do not recommend that you power wash your refrigerator. Instead, use a mixture of bleach and over-the-counter cleaners.

The best way to prevent clogged gutters is to have them professionally cleaned regularly. Another way to prevent clogged gutters is with the use of a gutter guard.

You should pressure wash your deck at least once a year, however, if you live in an area where lots of natural debris and dirt accumulate quickly on your outside surfaces, you should pressure wash your deck 2-3 times a year.

Gutters commonly overflow for one or more reasons: too much rain, too few gutters, downspouts, and clogged gutters and/or downspouts.

For any siding, you should try to have its power washed at least once a year in order to keep mold, and algae away from your property.

No, it's not safe to lean a ladder against a gutter. Make sure you lean your ladder against a strong resting point that's sturdy enough to support it.

Only use low pressure when washing the exterior brick on your house. Pressure washing using 500 to 700 PSI is recommended for cleaning brick. Many professionals use 100 to 500 PSI to avoid damage.

You can tell your gutters are clogged if you constantly spot birds or pests around your gutters if water is spilling over the sides, if your gutters are sagging, and if there is plant growth around your gutters.

It depends on the size of the property and what you want to be cleaned. Power washing projects can take the average person 3-5 days to completely finish but when working with professionals it can be done as quickly as 3 hours!

The short answer is yes, gutter guards work. While they can't guarantee that you'll never have clogged gutters again, they can significantly reduce the number of times you need to clean your gutters and lower the risk of damage to your home. Most gutter cleaning companies offer a gutter guard with their services.

Without the proper training, knowledge, and experience, pressure washing a home can be extremely harmful to your property. But when trained, and have enough experience, pressure washing your home is the best way to restore its original look.

In general, you should make it a point to clean your gutters at least twice a year. However, if you live closer to trees, especially pine trees, you might need to clean them 3-4 times a year to prevent clogging.

Power washing your home will remove any trace of mold, mildew, algae, lichens, or stains that may be present on your exterior siding, deck, driveway, or fencing. However, never power wash your roof as it could cause serious damage.

Many professions agree that spring and fall are the best times to clean your gutter. Gutters should be cleaned a minimum of twice a year. But if there are trees near the home, more may be advised. Homes near pine trees are recommended to have their gutters cleaned every three months.

To prolong the life of your driveway, pressure washing the surface will clean and remove all weeds and bacteria from your driveway.

For a single-story home with 200 linear feet of gutters, the average national cost is in the range of $100 to $130. For a two-story home, that increases from $125 to $250 for 200 linear feet. For a home that is three or more stories, the average gutter cleaning cost is $320 to $425.

A wooden 1-story or composite deck will clean up greatly with the use of a pressure washing machine, as it will be sure to spray away all the mold, algae, and grime collecting on your deck during the off-season.

Yes, it is very possible to damage concrete with a power washing machine. The power washing machines can reach up to 5,000 PSI which can scratch and crack your concrete and cause costly repairs. A safe PSI to power wash concrete at is 1,300-2,000 PSI.

While it is possible to power wash with just water, adding a specialized cleaner can make removing tough stains a lot easier. Our cleaners are tested for safety and are eco-friendly so they will not harm any surrounding landscaping.

For the best results and a consistently clean exterior, experts recommend that you pressure wash your home every 6-10 months.

Although pressure washing can be done any time of the year, excluding during freezing temperatures, the best time to schedule a professional pressure washing service is between March and November. Keep in mind for best results you should pressure wash your home at least once a year.