Woodworkers Source

Hi Dale, Yep! We can dice up a sheet of plywood however you need. If it is your own material, we do have an additional fee. Stop on by!

Hi Lizbeth, JET launched a parts store online, you should be able to search for the part here: https://store.jettools.com/. If not, give us a call, and we can see if our rep can help in sourcing the replacement belt. Thanks!

Depends. Most often it's milled into a different product

Hi Carl, we have a lumber by the pound bin that will have a variety of small odd pieces. Otherwise as Matthew said, we can cut a piece off of any board, you just have to take at least 12" of the board.

Yes we carry it

Lots of what you are looking for. They also honor a military discount if you qualify as a vet. Just ask them at checkout.

Hi Grady, not sure if you are asking about 1 inch or a diffent thickness. We don't stock 1 inch Baltic but do carry a variety of baltic birch in 4x8 sheets. Just give us a call or stop by.

Sorry, we do not sell 2x4 wood.

Hi Sue, Like Josh said, there are a lot of 'depends' to answer your question. We do try to stock a variety of live edge slabs, your best bet is to give us a call and we'll try to help you out. Thanks, Corey

Hi, we have a book on carving patterns and carving basics. But I would suggest searching on Amazon or Google to find something more specific to what you have in mind. - Corey

Hi Julie, It would be best to bring in a sample to the store and we'll see if we can help. Thanks, Corey

Hi Vickie, you'll definitely want to protect raw wood, but I would hope whoever built the table would have already applied a finish.

Hi Jim, as Charles stated, that's called book matching. All the best on your project! - Corey

Hi Brian, we sure can. We have a 20" planer and 36" belt sander in store, as stated below, there is a $15 minimum charge, otherwise we can quote the labor based on our hourly rate.

Hi Leilani, we have 30" leg blanks. That just means they are still a raw hardwood that is ready to be turned or just finished to your need.

They have a good selection, a lot of special tools too. Note - it's not my store but it's a great store for "wood enthusiasts".

Well you can use 2 x whatever and a table saw. That Would be the easiest.

No, what we have is raw hardwood lumber and plywood that you could use to cut out your own numbers or letter for signs

Yes, usually a variety of sizes and woods are in stock. The selection is constantly changing

Yes. Cost depends on how much you have that needs to be planed. It's time based. Best to bring it to the shop to get a firm quote