EHS Construction Services LLC

The most common plumbing problems are clogged drains and toilets, leaky faucets and pipes, water heater issues, low water pressure, and a running toilet. While most of these can be solved in a DIY fashion, some more serious issues will require a licensed professional to come out and assess issues with your current plumbing system.

Toilets typically use the most water in the home, beating out showers, dishwashers, and sinks. This is because of the frequency toilets are often used. You can adjust the water level that the basin fills up to with a couple of quick adjustments. Also, there is the option to install a low-flush toilet, which uses less water.

The best way to prevent your pipes from freezing is by insulating your pipes. If you are not able to insulate your pipes you can leave the water on a slow drip on very cold nights. The water constantly running will prevent your pipes from freezing.

The biggest benefit of a tankless water heater is that they never run out of hot water. A storage tank hot water has a limited capacity (whatever the size of the tank), while a tankless can heat unlimited amounts as it passes through the system. Tankless water heaters can also save you money by only heating the water you use, not the amount of water that is sitting in the storage tank.

The most common cause of faucet leaks is a corroded gasket, o-ring, or valve. This is often an easy fix. Most of the time, those parts can simply be replaced without replacing the whole faucet.

The most common reason for this is a clogged drain basket. Start by running your garbage disposal. From there clean your sink's air gap and remove standing water. A shop vacuum is recommended for this. Clean up any detergent that could have accumulated on sensors. Check the drain basket/ filter in the bottom of your dishwasher and clean it out thoroughly. At this point check the drain hose for kinks, as well as any possible clogs/ obstructions. If necessary replace the drain hose and if problems persist then contact a licensed professional.

In short, no. Chemical drain cleaners can cause damage to pipes. The chemicals can cause degradation when used in old pipes repeatedly. When used in plastic pipes, chemical drain cleaners create heat which can damage the plastic pipes. In addition to possible damage to your home's plumbing system, chemical drain cleaners are bad for the environment and septic systems.

Your garbage disposal can handle fruit scraps, fruit pits, vegetable scraps, corn cobs, cooked meat, small bones, leftovers, and ice. Avoid grease, oil, none food items, fibrous vegetables and peels, eggshells, shellfish, and coffee grounds.

This is often the result of the handle getting stuck. This causes the flapper to remain open which will allow water to continue to flow into the bowl. Fixes could include tightening, lubricating, or replacing the handle.

The most common signs to tell if your plumbing system requires service include odd sounds coming from the faucets, low water pressure, unpleasant smells coming from the drains, sinks or tubs draining slowly, and stained or damaged walls.

Indoor Air Quality Testing and Contaminants Biological pollutants, like mold, dander, pollen, dust mites, and bacteria. Chemical pollutants, which include volatile organic compounds (VOCs) like formaldehyde, and the other chemical pollutants lead and radon.

(1) Pollutant: carbon monoxide (CO) (2) Pollutant: radon. (3) Pollutant: nitrogen dioxide (NO2) (4) Pollutant: secondhand smoke. (5) Pollutant: lead particles. (6) Pollutant: asbestos. (7) Pollutant: mold.

Whenever there is a water leak, you risk creating a habitat suited for mold growth, so it's best to have leaks fixed on time. Furthermore, if leaks occur in hard-to-reach areas, like inside your walls, you should call a mold remediation professional to inspect it and nip any mold growth in the bud.

Dryness and irritation of the eyes, nose, throat, and skin. Headache. Fatigue. Shortness of breath. Hypersensitivity and allergies. Sinus congestion. Coughing and sneezing. Dizziness.

The Water Damage Restoration Process Step 1: Emergency Contact. Step 2: Inspection and Damage Assessment. Step 3: Water Removal/Water Extraction. Step 4: Drying and Dehumidification. Step 5: Cleaning and Sanitizing. Step 6: Restoration.

Is it safe to stay in a room with mold? No, it is not safe to sleep in a bedroom with mold. Indoor mold of any exposure is worrisome, but mold in the bedroom is especially so, simply due to the number of hours you spend in your bedroom breathing it in while you sleep.

To simplify: Remediation is removing contaminated material and mold. Mold removal is the removal of actual mold from surfaces, but not removing the material.

Mold professionals will use an antimicrobial chemical to clean any remaining mold and mold stains after demo. Mold professionals often use a sealer or encapsulant to make the treated areas more resistant to water damage and mold, and also to help with odor control.

It is possible for mold to return after remediation, but only if you fail to find the source of moisture creating the mold problem. It is imperative that the source of water is fixed, whether that is a leaky window or a cracked pipe.

When dealing with leaks it is important to keep in mind that water wants to find the path of least resistance to travel, which means that your leak could present itself in parts of your house that aren't close to the actual leak. One solution is to go into your attic or crawl space with a flashlight the next time it rains and try to trace the leak. Visible signs, such as pooling water or damaged drywall/building materials should be present. However, this isn't always effective due to walls or other physical obstructions blocking your view. The most accurate way to track the leak is to have a professional come out and access the leak.

Most damage that a roof will take on is the direct force of nature. Severe weather, including typhoons, haboobs, hailstorms, snowstorms, and tornados contribute to the degradation of a roof. Algae and mildew, as well as sunlight, can also be a source of roof damage.

One of the big questions to ask is the age of the roof. If a roof is older than 15 years it may be time to contact a local contractor to inspect your roof and give their recommendation on how to proceed. Generally speaking cracked, broken and curled shingles can be replaced individually and are often the cause of issues like leaks. Roofs with widespread issues are more likely to need replacing, as the whole roof system may be compromised.

If your roof is old and underperforming, roof replacement can help lower energy bills. Ideally, an attic should remain close to the outside temperature, but overheating in this space during the summer is a sign of inadequate ventilation. This inadequate ventilation can cause an HVAC system to work much harder than necessary. A new roof helps ensure that your HVAC system can work properly and keep stress off the system causing more power to be consumed.

Your roofing system is comprised of several layers, all performing a different function. Generally speaking, replacing the entire system is the best route for improving the roof’s performance. The different layers of a roof can include leak barrier protection, sythetic roof deck protection, starter strip shingles, lifetime shingles, and ventilation.

In short no. There are projects which can be completed with a DIY mentality, however, due to the dangers of working on ones' roof, completing a roof replacement yourself isn't something that should be attempted. Not only do thousands of Americans die annually from falling from roofs, but you could be violating your roof's current warranty which could wind up costing you down the line.

Weather typically plays the largest factor in timing when to get your roof replaced. While contractors work year-round, factors like snow, rain, ice, and sleet can impact how quickly roofers can safely and effectively get their roof finished.

There is no straightforward answer because every roof is different. Roofing contractors consider a few factors when pricing out new roof installations: size, old roof removal, style, shape, materials, and labor. In addition to these factors, your roof could include other features like chimneys, skylights, and vents that need to be factored into the cost. Contact a licensed roofer near you to get an accurate quote.

The longevity of your roof will depend on its materials, its installation, and its ventilation. Weather conditions may also impact the life of your roof. A well-constructed roof can last between 12-15 years. Depending on the quality and type of shingles you chose and the underlayment of your roof, that number can go up to 30 or more years.

When assessing whether or not to replace your roof the first question that should be asked is "How old is my roof?". Most roofs will last around 15 years but signs that it is time to replace your roof could include: holes in your roof, missing or damaged shingles, or leaks.