Pro Rooter Guys - Plumber in Orange County

First call your septic company and have them perform a proper septic inspection. An licensed inspector is the only one who can say that your system is failing. There could be minor or major repairs depending on the reason why the system has failed.

Filters keep the hair, grit and grime from getting out into your leach field lines. A filter goes on the outlet tee of your septic tank and would act as a strainer, keeping all solid large particles in the tank and therefore OUT of your leach field lines.

Possibly. If your septic has not been serviced in more than 6 months, we would want to service the septic first. If the problem persists, a drain cleaner will then be sent out to clear the washer line to the septic

Yes! Bacteria must be present in the septic tank in order to break down and digest the organic solids. Today, households use a wide range of anti-bacterial soaps, detergents and cleaning fluids. While these ordinary household products do a great job killing unwanted bacteria in your home, they also destroy beneficial bacteria that your system needs in order to function properly.

Experts say you should have your system pumped every 1 to 2 years but several factors should be considered when deciding how often your septic tank needs to be serviced. You must take into account the age of the system, the number of occupants in your home, the use of a garbage disposal and the amount of laundry being done in the home. Every system is different. What is right for your system may not be right for your neighbor’s. If you have a question about when your septic system should be pumped, give us a call!

During a proper septic pumping service your technician will pump the entire septic tank down. Once he is done pumping he will check the inlet and outlet tees to the tank to ensure they are still intact and working properly. He will also check the bacteria count and the tank levels. At the end, he will ask you to flush your toilets so he can make sure everything is flowing back properly. Once the service is done he will cover the lid back up and give you a full detailed service report.

A drain is a pipe that drains water and waste from a building and other buildings which belong with it, for example a garage. A lateral drain is a length of pipe which carries wastewater away from your property to a sewer. It’s usually located outside your property boundary, often under a public pavement or road. A lateral drain might run under your property if you share a sewer with your neighbour. A sewer collects water and waste from the drains of a number of buildings. Most sewers are publicly owned and are maintained by your water company. However, there are still some privately owned sewers. Some people aren’t connected to a sewer but to a cesspool, septic tank or treatment plant. If you aren’t connected to a sewer, you won’t have to pay sewerage charges to a sewerage company.

There are many causes of main line stoppages, but the following are some of the most common: Years of built-up, sludge, grease and grime Foreign objects that easily become obstructions Growing tree roots spreading through the pipes Broken or dislocated pipes Or, if your home has a septic tank, an over filled tank

Often we are asked if it is the city’s responsibility to take care of these types of main line stoppages, and the not-so-straight-forward answer is, it depends. If the problem is within the lateral sewer line, it is actually the home-owner’s responsibility. If you have tried everything, but the clog persists, it might actually be located within the municipal pipe and would then be the city’s issue. This is something you really wouldn’t know until after a thorough inspection. To clear a sewer drain clog though, you will need a sewer drain snake. You can either rent one from your local hardware store or call a professional plumber. I recommend calling a professional plumber, and I promise it’s not just because I am one, but because a professional plumber has the tools not only to unclog your sewer, but to also check for the cause and completely clear the pipes so the problem does not persist.

The foreboding signs of a toilet that won’t flush, foul-smelling drains, or sewage coming through your shower often point to a homeowner’s worst nightmare: sewer stoppage. If you notice any of these telltale indications, it may be time to reach out for professional plumbing services. Sewage stoppage is an emergency issue. So, as you wait for help, it can be useful to unscrew the cap of your home’s cleanout. This is located outside, usually within a few feet of your home. Look for the end of a plastic pipe, just above the ground, with a cap or plug. You can unscrew this cap to allow it to spill over outside of your house rather than inside. This will alleviate the issue as it takes place inside your home as you wait for help. However, be sure that as soon as you are aware of the problem to call on professional help immediately.

As you wash dishes every day, food and other particles get trapped in your kitchen drains, which can cause them to clog over time. In fact, clogged kitchen sinks are the most common reason for calls to plumbers and are considered a minor issue. However, a clogged kitchen sink may also be a sign of a more serious plumbing issue, so it must be attended to properly by a professional. The national average cost for unclogging a kitchen sink is between $150 and $500, with most people paying around $300 to unclog a kitchen drain using an electric snake. At the low end of the spectrum, you can pay only $100 for minor clogs at any kitchen drain part that is not the main pipe using a snake. At the high end, you can pay up to $1,350 for emergency calls to the plumber in non-business hours for severe clogs in the main pipe line.

There are three basic approaches to dealing with a slab leak. The option that’s best for you depends on the extent of the leak as well as the condition of the pipe and the rest of your plumbing system. Repair the damaged section – If the leak is minor and the pipe is in otherwise good condition, this is generally the most practical option. The leaking section of pipe and related fittings can simply be replaced. Epoxy pipe lining is another possible option. This involves lining the interior of the pipe with epoxy to seal the leak and doesn’t require breaking the foundation. Reroute the pipe – If the leaking pipe is old or in poor condition, repairing a leak in one spot could cause a leak to spring somewhere else on that pipe. In this case, the best option may be to shut off the pipe at the closest manifold and re-route it. The pipe will typically be rerouted above ground.

Now that you know what hydro jetting is and how it works, you might be wondering if it is right for your home, and the best person to answer this is a licensed and experienced plumber. They will make sure your pipes are in good condition, and if not, they will recommend other solutions to get your drains running smoothly again in no time. However, if you are a good candidate, there are plenty of benefits to hydro jetting versus other drain cleaning solutions.

Hydro jetting offers serious power against clogs. When you are dealing with sewer lines, tree roots can grow into the pipes and create clogs. Other drain cleaning methods can’t always get rid of stubborn roots. Hydro jetting has the power that it takes to eliminate stubborn roots and cut through clogs. Hydro jetting is the most efficient way to clean out clogged drains.

A kitchen stove line costs an average of $20 per linear foot, though there is often a minimum charge for a plumber to come to the home. Expect to pay at least $120 for the entire project. Kitchen appliances get gas through a flexible steel hose connected to the solid black iron pipe that sticks out of the wall. The layout of your kitchen and the complexity of the installation can more than double the price.

Repairing a gas pipe is going to vary drastically in price for a variety of reasons. Location of leak. A few examples include: a leak at a junction behind a stove is a simple remove and replace and can cost $120 to $250. Leaks hidden in walls and crawlspaces take longer to find and can incur additional drywall costs of $270 to $760 on average. Buried lines require excavation and landscaping. Add an additional $1,500 to $5,000. Material Pricing. The type of pipe used along with the length of replacement add material costs to your overall bill. Repair is imperative in the event of a leak. The rotten egg smell caused by sulfur additives alert you to any leaks. Contact a qualified professional immediately if you smell sulfur. Tubing often corrodes over time, this is especially true at joints where it changes from one type of material to another.

Basic repairs such as installing a new shower head, new mixer, base seal, shower tray seal or leak detection will cost anywhere between $250 to $800 by a professional plumbing company.

While it can be tempting to fix a few plumbing jobs around your house, plumbing is a licensed trade. Only those with a license should be conducting plumbing work. With that said, there are plumbing jobs that can only be done by the plumbing company.

Always use a plumber from a professional plumbing company to install your mixer tap. When a tap mixer is installed, the hot and cold water flexes are classed as water pipes.

The national average cost of a plumbing company to repair pipes is $150, but prices range from $49 to $375. Hourly plumber rates range from $50- $140 per hour for pipe repairs.

Our plumbing company first unclogs your main sewage line by finding the clean-out plug in your basement, crawl space, garage, or outside wall of your property. Insert an auger cable or sewage rod into the clean-out plug and work it through until it clears the obstruction.

A call-out charge is a charge for coming out to you which is on top of the cost of any work or repairs. So, for example, a plumbing service might charge you £100 for coming out to look at your faulty boiler and working out what the problem is.

Yes, plumbing services differ depending on the sort of maintenance you want.

For a regular job, the cost of an expert plumbing service ranges from $175 to $450, with the average hourly cost ranging from $45 to $200. Repairs on faucets, toilets, sinks, and bathtubs are all examples of this.

Plumbing services roles are Installing or maintaining heating systems, Repairing sanitation systems, Fitting domestic appliances (such as dishwashers) Installing air-conditioning units.

Plumbing services can minimize our water consumption through technology and water management. The following services are vital in the implementation of various water-saving practices, such as rainwater harvesting, desalination, wastewater treatment, and water reuse.

Usually, plumbers and gas company professionals make repairs to gas lines. ... If you smell gas on your property, it is most likely a plumber that will need to repair it.

Most people tend to call the electrician, but they can only help with the electronic issues. When it comes to washing machine line repairs or some other water-related issues, the plumber is going to be your best bet.

In most cases, it's perfectly possible for a plumber to carry the toilet piece by piece by yourself without any assistance. In total, the average two-piece toilet weighs between 70 and 100 pounds.

The cost to install a faucet is between $162 and $354, with the average being about $252. A qualified plumber can typically install a new faucet quickly, depending on factors such as the condition of your pipes, location of the sink and the type of faucet.

Yes. A toilet is part of your plumbing system, and needs to be installed by a licensed and qualified plumber.

Professional plumbers are much more than primary or emergency plumbers. In addition to servicing and maintenance, they also offer complete bathroom faucets, kitchen appliance installation, water heater installation, and more. Professional plumbers are beneficial in making improvements to your home and having it better equipped.

Professional and qualified plumbers offer essential plumbing services, camera inspections for line obstructions, replacement of drains, faucets, toilets, hot water system repairs or replacement, broken pipes, stormwater, emergency maintenance, blocked drains, dewatering machines, and more. When you hire a professional plumber service, you can be sure that their experience will solve your problem.

Our company is very committed to our clients. That is why all our plumbers are fully certified with the main accreditations. Our staff prides itself on being trustworthy, fully licensed, and the most professional. They are continuously trained and kept up-to-date with all the most advanced technology to provide you with an excellent service.

Any situation or failure in your pipes and you are not prepared to face it, and professional plumbers will take it as an emergency that they must deal with as soon as possible. You did not have the tools to deal with a leak or any situation. No matter how harmless it may seem should be treated as an emergency because it can cause significant complications. Only professional plumbers can guarantee the resolution of your problem without damage to your pipes.

The process only takes a few hours. During this time residents are asked not to run appliances and to limit water use. Once crews are complete, residents can resume using water and the process should never need to be repeated. Can the steam enter my home or business? No, but it is possible that odors from the process may enter your home. If odor is entering your home, it is likely through private plumbing defects such as cracks in pipe, dry floor drains and sinks.

In the past, your only option was to dig a trench in your yard to gain access to the damaged section of the pipe. With newer trenchless sewer line repair technology, we can often sewer repair a damaged sewer line from inside the line itself by cleared and the damage section and relining the damage section of the pipe.

Generally, odors entering homes are minor and subside quickly. Pouring water down dry floor drains and sinks, as well as opening a window should quickly eliminate the odor. In some very rare instances, the odor can be more severe. This may be more prevalent in older homes or homes with defects in the private sanitary sewer service lateral or home plumbing system.

The first question everyone wants to know – even before “how long am I going to have to go without using my bathroom?” – is: “how much does a main sewer repair cost?” A technician has to look at several factors contributing to a main sewer line replacement before he can give you an accurate estimate, such as: Trench vs. trenchless Video inspection  Pipe conditions Size of damage  Material of old and new pipe Location of damage

The best drain cleaning method depends on the issue you are having with your drains, the age of your pipes, and a few other factors. If you have a blockage in the drains, you may want to hire a professional to clean them with an auger. Sometimes called a drain snake, an auger unrolls into your drain and pushes the clog through the system. You can buy augers, but ideally, you should not use an auger on your own. If you use too much force, you could easily break through the pipes.

Some drain cleaning companies make promises they cannot fulfill, such as service in one hour or less. The timeliness of the sewer cleaning service provided depends on a number of factors. The size of the sewer cleaning company, the area they service, and their in-house infrastructure, are just some factors that determine the response time. A reputable drain cleaning company should be able to provide an accurate response time to within a half an hour. If delays occur, advanced notice provided to the client is the industry norm. Most service should be able to be provided in one to two hours. This accounts for travel time as well. You would always verify that you are in the drain company’s service area.

No. There are some basic clogs you can clear out with a plunger or a simple hand-cranked drain snake. If neither of these work, or the problem returns frequently, you’ll need more extensive drain cleaning work from professionals to tackle the problem.

First, you’re doing the right thing. Some basic steps like drain covers and keeping grease and fats from being poured down the drain go a long way toward preventing clogs. If clogs are still happening, you need a drain cleaning, please remember that you can’t stop all unwanted waste from going down the drains. Eventually, drains are going to clog up, and this is one of the reasons routine drain cleaning is so helpful. The clogs may be due to other issues, such as hard water deposits or the previously mentioned broken sewer line.

If you are having trouble with just one sink draining, then more than likely you have a stoppage in the immediate drain line. These can usaully be removed by using a drain snake to clear the line. However if it is further down the line you might not be able to reach it with a regular drain snake, and you should call your plumber. If the water is draining slowly then you might have what is referred to as a partial stoppage which is allowing some water to pass through at a much slower speed. The first thing you should check is the pop-up to make sure there isn't any obstructions like hair in the line. If there are no obstructions that you can see, you can try using a drain cleaner to remove the debris in the line.

A main line sewer stoppage, or sewer drain clog as it’s also called, is a serious issue. It is considered a top plumbing emergency! A main line stoppage occurs in the main sewer line that connects your home plumbing to either a septic tank or your city’s municipal sewer system. If this line becomes clogged, gray, or used water from your home drain system begins to back up and will eventually start to seep back through your drains in any way possible, and yes, this is often quite a gross site to see! It can also be extremely hazardous to you and your family for a multitude of reasons, such as bacteria and water damage (which leads to mold and other harmful bacteria). So if you suspect a sewer drain clog, you need to get it cleared immediately!

We rely on water to clear away our waste and yet we often take this precious commodity for granted. The best way to avoid plumbing problems in your home is to focus on the flow and develop a consciousness about where the water you use goes. Plumbing stoppages are one of those disgusting facts of life that most of us prefer to ignore when they occur. However, it is important to know when the plumbing problem is out of your control and that you should call your plumber to prevent it from escalating.

all depends on what’s causing the stoppage and the type of solution you want. For an immediate fix, which is essentially poking a hole in the stoppage to allow water to drain, we may be able to complete in a day, depending on if we can poke a hole through the obstruction. Although this will allow water to drain in your home again, it’s likely that you will experience the same problem shortly after we leave.

For residential properties the most common solution is a reroute and for commercial properties the most common solution is a direct repair. A direct repair is when we jackhammer into the floor to expose the pipe and a reroute is when we cancel the line and re-direct the line overhead. Typically residential property homeowners don’t want to ruin their flooring so a reroute is a cost effective and non-invasive solution. Every situation is different and I make sure to talk with my customers to make sure we determine the best fit for them, whether that’s a cost-effective solution or the most long-term solution like a repipe which is when we reroute all of the water lines under the slab.

If you suspect there is a water leak in your slab, contact a professional immediately. They will use several tools to determine if you have a leak and where the leak or leaks are occurring. For example, if there is a hot water leak, the professional might use a thermal imaging camera to detect hot spots in the slab. When there are hot spots in the slab, it typically means there is hot water found somewhere in your slab. There are also special devices that will allow a professional plumber to listen for a leak and pinpoint the exact location of the damage.

A slab leak can occur for several reasons. For example, if you have copper pipes running through your slab, the minerals inside the water coming into your home can cause the copper to corrode. Eventually, the corrosion will lead to holes in the pipes that will allow water to leak into your slab. Another common cause of a slab leak is high water pressure. If your water pressure is too high, it will cause damage to the pipes. This damage will then cause a leak in your slab.

In homes where there is no crawl space or basement, or there is a portion of the home that is not laid on top of a basement, there is a cement slab. This slab acts as a foundation, and typically, there are several pipes running through this cement. When a leak occurs in this plumbing, for whatever reason, it is referred to as a slab leak. The leak can be anything from a small hole that causes a trickle of water to major damage that will cause a serious leak under your home.

This answer will give you a detailed overview of the difference between storm and main sewer lines. To put it simply, Storm lines carry rainwater and groundwater to open bodies of water such as streams, lakes and oceans. Sewer, or sanitary, lines carry wastewater from homes and commercial buildings to treatment plants. Storm drains and sewer drains are typically installed separately to prevent cross contamination. Clogs in sewer lines can be much more hazardous as they can cause backups in wastewater filled with bacteria.

Video pipe inspections provide you with a recorded inspection of your main water sewer lines. Prior to a sewer line and drain cleaning, the technician threads a flexible cable with a high-resolution camera on its tip into your sewer line from an access point. The video camera travels deep into the pipes, and around corners if necessary, transmitting real-time images to a monitor outside the pipe.

Sometimes an exact price cannot be determined until the nature, or extent of the problem has been diagnosed. For example, you may think you have a small problem with just a few slow draining sinks, but in reality you have a much larger problem – your main sewer line has been invaded by roots and is clogged in several places as food waste and other debris have become tangled in the roots.

The most obvious sign I need a water main line cleaning is a backup, either from a fixture or from a floor drain. Other signs include: * Toilets not flushing properly * Toilets gurgling * Slow drains in multiple areas, such as bathroom tub and sink * Foul odors from drains or yard

It’s very unlikely that hydro jetting will damage your drains. Most homes now have plastic pipes, which are quite sturdy and won’t be damaged by a hydro jet. If an older home has cast iron pipes that are already quite corroded, it is possible that hydro jetting could exacerbate the existing damage. A normal pipe will withstand hydro jetting with no trouble at all.

Hydro jetting offers serious power against clogs. When you are dealing with sewer lines, tree roots can grow into the pipes and create clogs. Other drain cleaning methods can’t always get rid of stubborn roots. Hydro jetting has the power that it takes to eliminate stubborn roots and cut through clogs. Hydro jetting is the most efficient way to clean out clogged drains.

When you have a clogged line, the first line of defense is a plunger or a plumber’s snake. When those methods don’t work, the hydro jet is the next best step. Roots in the sewer lines and other clogs are sometimes more than a snake can handle, but the hydro jet can attack these clogs with no problem. Hydro jets can also be used for maintenance to clean out drains before a clog becomes a problem.

Hydro jets use upwards of 4,000 PSI with a flow rate of 18 gpm. This is classified as ultra-high pressure. Hydro jets can clean out drains from 1 ½ to 18 inches in diameter and up to 700 feet long.

Costs can vary based on materials, labor, and difficulty of installation. For example, where the gas pipes are installed can determine how much technical experience is needed by the contractor to complete the job.

Before hiring a gas line installation contractor, we recommend doing your research. While we understand doing research on natural gas line installation companies probably isn’t what you want to do during your weekend, it can save you a lot of grief.

Yes. Your contractor will need to apply for the permits required in your area. After the gas line is installed, your contractor will also need to schedule a natural gas line inspection so you can be sure your new line is safe and code-compliant.

One of the most common reasons for gas line installation is a homeowner wants to replace electric or oil appliances for ones powered by gas. In general, gas appliances tend to be more energy efficient and less expensive in the long run