1. Remove belt shields. 2. Loosen the four nuts holding the gearbox support plate to the central plate. 3. Loosen the two blocking nuts on the adjustment bolt. 4. Turn the adjustment bolt counter clockwise, pushing the gearbox support plate forward until all tension is released. 5. Loosen rear nuts holding central plate (do not remove them). 6. Remove front nuts holding central plate. 7. Lift the front of the central plate and remove old belts. 8. Replace new belts. Loop the first belt over the left spindle and around the lower groove of the center spindle pulley and the lower groove of the gearbox drive pulley. 9. Lower central plate. 10.Replace front nuts. 11.Turn the adjustment bolt clockwise until the proper belt tension is reached. 12.Tighten the two blocking nuts on the adjustment bolt. 13.Retighten the four nuts holding the gearbox support to the central plate and replace the belt shields.
Call 9779920 ask for travis in parts
Thanks! Your answer is awaiting moderation.