SuperGreen Insulation

Attic insulation could take one to two days. This depends on how much old insulation in the attics must be removed.

Typical lifespan of attic insulation is 20 to 30 years, with degradation beginning as early as 15 years after installation.

Blown-in insulation is cheaper and much more effective since it allows you to easily insulate those hard to reach areas for attic insulation.

According to studies, you can put new insulation over old attic insulation, “unless it is wet".

Installing attic insulation in winter is a worthwhile long-term investment because it can significantly decrease your heating bills.

Old attic insulation settles with time, necessitating the addition of new insulation or old attic insulation removal in some situations. If you haven’t had your attic insulated in a while, the first thing you’ll notice is the exposed attic floor studs. Yes, this indicates that your attic requires additional insulation, even if the original insulation still has the same R-value.

In some cases, insulation can be added over existing layers, but there are times when insulation removal is mandatory. When insulation is old or damaged (by mold, insects, water, fire, etc.), it should be completely replaced.

Yes, some materials can! When installed by professionals, cellulose can be completely recovered and reused on site, leaving hardly any excess material to go to waste. Fiberglass insulation is another material that can be reused after the initial installation and is recyclable. Call us to get a quote regarding the costs of insulation removal process.

Take a look in your attic, and if you can see your floor joists, there is evidence of mold, the insulation looks rotten or deteriorated, or there are bare spots with no insulation, then you definitely require an insulation removal service. Contact us at eco choice attic insulation for expert advice.

Your insulation needs to be removed along with the droppings, as it'll carry some of its toxicity if left in your attic. old insulation removal and replacing it with new ones will not only rid your home from any rodent infestation and mold, but also improve its energy efficiency and overall air quality.

In order to do the insulation installation on the cavity wall, it is injected with insulating material by drilling holes in the external wall, through the mortar joint. Holes are generally of 22-25mm diameter and are ‘made good’ after injection. Each hole is injected in turn, starting at the bottom.

Installing fiberglass or mineral wool insulation can be a simple project for those willing to do it themselves. However, this cannot be achieved with certain types of insulation such as spray foam insulation which always requires a professional. Contact us for insulation installation.

Insulation materials are rated by the quality of noise reduction and sound interference they achieve. There are different kinds of sound, and different means of rating acoustic performance overall, many unwanted sounds are muffeled after insulation installation.

Different climates require different insulation R-values. You will need a higher R-value of insulation if you live in Northern areas of the state than if you live in the Southern regions. Call us to get an estimate on how much would the whole insulation installation process cost.

Most wall products have a stapling flange on the facing. Hold the flange against the inside edge of the stud. And staple if necessary the insulation should fit snugly against the studs. Call us to get an estimate on how much would the whole insulation installation process cost.

Most homeowners store their personal belongings in the attic. But, if you haven’t gone for attic cleaning in a long time, there probably isn’t much storage space available. Sorting through your belongings will help you get rid of things you no longer want or need and clear up a great deal of storage space in your attic.

Our knowledgeable staff are adept at removing all contaminated insulation and properly rodent-proof and decontaminate your attic before installing new insulation services. Our team expertise in performing attic cleaning jobs. Call us today to get a quote regarding costs.

Ideally, attics should be cleaned and decluttered seasonally to remove dust and check for any problems. Realistically, a thorough attic cleaning including sorting through stored items once per year is essential.

We provide an alternative solution for getting rid of pests which is called pest proofing. By sealing up all entry points into the structure we ensure no pests can continue to enter the home. Call us today to get an estimate on the costs of attic cleaning.

The cost of removing old insulation depends on the area of the attic. Keep in mind, this is on top of the price of installing your new attic insulation.

For attic insulation start by making sure the attic is air sealed. Be sure to block off any openings where insulation can fall into other levels of the house.

In the summer, attic insulation helps reduce heat gain through the ceiling to living spaces below. Attic insulation blocks heat from entering the home in the summer and holds heat in during the winter, which results in a cooler home in the summer, warmer home in the winter, and lower energy bills.