Guaranteed Property and Mold Inspection

An asbestos survey is required prior to any demolition or renovation of any structure no matter the year the structure was built. The only exception to the survey requirement is the renovation activity of residential single-unit dwellings (houses) in which less than 100 square feet of the surface area of intact (not damaged) material is removed or stripped. ACAC or Certified Site Surveillance Technician (CSST) is trained to be able to identify homogenous-suspect materials and can presume or assume the material is Asbestos-Containing Material (ACM).

If your home has been tested positive for mold and a proper comprehensive mold investigation has been completed by an ACAC accredited mold inspector/hygenist, you must contact an ACAC/IICRC certified mold remediation/removal contractor to review our report, make a site visit and provide you a detailed written estimate for work to be performed. Once you have hired an accredited remediation contractor and the contractor notifies you that the work is complete and areas are ready for post-remediation clearance, you must retain the hiring ACAC certified mold inspection company to inspect and re-assess the area(s) to ensure all mold has been removed successfully. An indoor air quality sample must be taken from outside of the property, and one within the specified containment to ensure that the air quality is within a normal fungal ecology, and the build back of the areas may begin.

If a general home inspector identifies areas that may have actual visible mold or areas of suspected mold, they will most likely red flag the suspect area and consult their client to have the area(s) evaluated further by a properly certified mold inspection firm. If this is the case with your home, do not panic! We can come to your property and provide a site assessment of the areas of concern and confirm whether mold contamination is present or not. If the laboratory returns a report that shows that fungi were not detected during analysis, then we can provide a report stating that the suspect areas do not contain any findings of concern via our investigation and data received by the accredited laboratory. If the laboratory confirms that, in fact, mold contamination is present, then we will provide you with a detailed report which includes a scope of work so you as the client know exactly what to expect for a successful mold remediation/removal.

Mold testing cost is dependent on many different factors. For instance, types of mold testing that may be required and how many different samples are needed depends on what type of condition the property is in, has there been current or active leaks? Have there been any water losses? The only way to answer these questions is by completing a comprehensive mold inspection on site. This allows the hygienist to pinpoint and locates each individual area of potential contamination. The comprehensive inspection is the key component in determining the source of the contamination and the presence of mold. The site assessment also allows us to develop a mold sampling protocol that will best fit the client's needs. Comprehensive mold inspection cost depends on the square footage of your property. With that vital information, we can provide clear pricing to complete your mold inspection and mold testing.

One can never know it all, and the inspector’s commitment to continuing education is a good measure of his or her professionalism and service to the consumer. This is especially important in cases where the home is much older or includes unique elements requiring additional or updated training.

There are many state and national associations for home inspectors. Request to see their membership ID and perform whatever due diligence you deem appropriate.

This is a valuable educational opportunity, and an inspector’s refusal to allow this should raise a red flag. Never pass up this opportunity to see your prospective home through the eyes of an expert.

Ask to see samples and determine whether or not you can understand the inspector’s reporting style and if the time parameters fulfill your needs. Most inspectors provide their full report within 24-48 hours of the inspection.

Costs vary dramatically, depending on the region, size, and age of the house, scope of services, and other factors. Consider the value of the home inspection in terms of the investment being made. Cost does not necessarily reflect quality.

The average on-site inspection time for a single inspector is two to three hours for a typical single-family house. Anything significantly less may not be enough time to perform a thorough inspection.

California regulations strictly forbid this as a conflict of interest.

Related experience in construction or engineering is helpful, but is no substitute for training and experience in the unique discipline of home inspection. If the inspection is for a commercial property, then this should be asked about as well.

The inspector should be able to provide his or her history in the profession and perhaps even a few names as references. Newer inspectors can be very qualified, and many works with a partner or have access to more experienced inspectors to assist them in the inspection.

The inspector should ensure that their inspection and inspection report will meet all applicable requirements in your state, if applicable, and will comply with a well-recognized standard of practice and code of ethics. You should be able to request and see a copy of these items ahead of time and ask any questions you may have. If there are any areas you want to make sure are inspected, be sure to identify them upfront.